SLEEV-IT - The Ultimate Sleeving System
The SLEEV-IT sleeving system is perfect for surface run heating pipes and other copper, steel or plastic pipes and conduits.
The Double Sleeve fittings are ideal for all surface radiator circuits in central heating installations, while the Single Sleeve fittings are suitable for all pipes carrying water, gas, oil chemicals etc. They meet all building regulations especially relating to Fire rated walls, offering fire protection for brick, block and plasterboard walls.
Anywhere that pipes, cables or conduit pass through walls, floors or ceilings the SLEEV-IT range is in its element making sleeving quick, safe and reliable.
Complete with intumescent sleeves, the SLEEV-IT range is a good friend to all users and specifiers, including architects, mechanical and electrical engineers, network installers, consultants, designers, builders and plumbers everywhere.
Features
Neat and attractive fascia plates cover the areas around holes, concealing disturbance to decorations and eliminating ugly plaster scars after refurbishment work.
Four small support lugs in the fascia plate bore, hold the pipe in place and prevent any contact between the pipe and sleeve. Minimal contact with the pipe also reduces the possibility of expansion noise problems.
Sleeving encases the pipework to prevent corrosion, and eliminate the need for any unsightly copper pipe or other sleeving extending through the wall.
Fascias are available in white ABS flame retardant plastic.
Intumescent sleeve offers 30 minutes to 4 hour fire protection.
Clients, architects, mechanical engineers and consultants can ensure that each pipe is adequately sleeved without the need for costly inspections.
Single Pipe Sleeve
Pipe size |
Fascia plate |
Sleeve bore |
Sleeve provided |
15 |
55 |
20 |
200 |
22 |
60 |
30 |
200 |
28 |
80 |
35 |
200 |
35 |
80 |
42 |
200 |
42 |
80 |
50 |
200 |
50 |
90 |
58 |
200 |
0.5" |
60 |
30 |
200 |
0.75" |
80 |
35 |
200 |
1" |
80 |
42 |
200 |
1.25" |
80 |
50 |
200 |
1.5" |
90 |
58 |
200 |
Unmarked dimensions in mm |
|||
Double Pipe Sleeve
Pipe size |
Fascia plate |
Sleeve bore |
Sleeve provided |
15 |
79 x 56 |
20 |
200 |
22 |
92 x 65 |
30 |
200 |
Dimensions in mm |
|||